Computers and Technology
An Introduction To Flame Ionization
A Flame-Ionization Detector (FID) measures real-time concentrations of organic vapors in low levels from parts-per-billion (ppb) up to 50,000 parts-per-million (ppm). A FID is a very sensitive instrument used in a wide variety of applications such as:
- Hazardous waste sites
- Clean-up of spills
- Protecting workers from toxic vapors
- Refineries
- Leak detection for compliance
- Pulp and paper plants
- Hazardous materials response
- Terrorist chemical attacks
How Does an FID Work?
FIDs, like PIDs, are ionization detectors. The difference between them is the way ions are produced. In our "introduction to PIDs" section you learned that PIDs use high energy Ultra Violet light to ionize molecules. FIDs do not use ultra violet light, instead the compounds in the sample stream are burned in a hydrogen fueled-flame. The hydrogen flame can ionize any organic material with an ionization potential (IP) of 15.4 or less. Like the PID, ions formed in the sample stream are driven in one direction by a bias electrode and accumulated at a collecting electrode. The ion current is then amplified and converted to a meter readout (analog or digital, depending on the model FID) in parts-per-million.
When to Use an FID
FID's just like PID's are primarily screening devices. They will detect any volatile organic compound (VOC) with an Ionization Potential below 15.4 eV. Simply put, a FID tells you that something is there, never what it is (besides that it is a VOC), and only sometimes how much. For example, the standard calibration for a FID is 100ppm Isobutylene, if isobutylene is the VOC in the air the ppm reading on the instrument is an accurate representation of how much Isobutylene is present. However, if there is or can be other VOC's in the air, you can only be certain that something is there, not what or how much. Sometimes FID's can be calibrated to other gases, like Methane. Some FID's contain built in correction factors that allow the instrument to be calibrated to Isobutylene but have the reading adjusted for other gases.
PID or FID?
PID's are susceptible to humidity and cannot detect VOC's with an ionization potential above 11.8 eV. FID's are not susceptible to humidity and can detect VOC's up to 15.4 eV. FID's are desirable in situations of high humidity, or when detecting gases with high ionization potentials like Methane. This comes at the cost of having to have a not only a battery, but a Hydrogen cylinder to fuel the flame.
Christopher Miller Equipco Rentals, Sales, and Service of Environmental Equipment 1-888-234-5678 EQUIPCO was established as a service and rentals company nine years ago, and we have since grown into a complete rentals, sales and service provider. We are a factory authorized/certified repair center for most of the major instrument manufacturers that you are familiar with. Why Rent From EQUIPCO? Three Reasons... Best Price Guarantee! More Choices! All Maintenance Performed by Engineers! |
Christopher Miller
Similar articles
Abatement with NanoBots Thru Swarming Column Strategies
In the future abatement with Nano Bots may be possible to take out clusters of bacteria, viruses or biological contaminants. How might this be done? Well, if each set of Nano Bots positions themselves inside of a grid and within each grid the Nano Bots worked together in swarming patterns or columns then such a strategy could actually work. Read more →Adobe-Photoshop -- A Basic Tutorial
The basics of Photoshop are relatively easy to pick up, but can seem a bit of a mystery when you first come to the program, thanks to its somewhat unintuitive interface and lack of simple tutorials. Read more →An Introduction To Photoionization
A Photo-Ionization Detector (PID) measures real-time concentrations of organic and inorganic vapors in low levels from parts-per-billion (ppb) up to 10,000 parts-per-million (ppm). Read more →Animated Clip Art
Animated clip art is very realistic and can be seen anywhere on the World Wide Web today. They can serve as decorations on your web pages, online greetings and electronic messages. Read more →Aphorism
However far modern science and techniques have fallen short of their inherent possibilities, they have taught mankind at least one lesson: Nothing is impossible.