Certification Tests
Cisco CCNA Certification Exam Tutorial: The OSI Model's Physical Layer
To pass your CCNA exam and earn this coveted certification, you've got to master the seven layers of the OSI model and what each layer does. For those of you taking the two-exam path, you can expect quite a few OSI model questions on the Intro exam. In this seven-part series, we'll spend some time taking a look at each of the OSI model layers, starting with the Physical layer.
Often, CCNA candidates ask if the OSI model has any practical uses for network administrators. I used to wonder the same thing, and I can now tell you that the answer is definitely yes!
The OSI model isn't something you want to memorize and then forget about, as using the OSI model gives you a structured approach for troubleshooting. Whenever a network device isn't working properly, I always say to "start at the physical layer". The Physical layer is Layer One of the OSI model, and this is where troubleshooting should always start. Is the device on? Is it properly connected? If everything is fine at Layer One, you just move up to Layer Two, and continue in this structured fashion until the problem is identified.
The Physical layer is the layer at which bits are transmitted over the physical media. There is no routing or switching going on at this layer. The data has been broken down into more manageable pieces until the data takes the form of ones and zeroes at the Physical layer.
Even though there's no routing or switching at the Physical layer, CCNA candidates should be familiar with a couple of network devices that work at Layer One. A repeater is a device that regenerates an electrical signal, allowing the signal to travel longer distances without fading. (The process of an electrical signal gradually fading in strength over distance is "attenuation".) A hub is basically a multiport repeater, and both of these devices are considered Physical layer devices. Ethernet and Token Ring both operate at the Physical layer as well.
Learning the OSI model's Physical layer isn't just important in your CCNA exam studies, it's the first step in any network troubleshooting. After all, your network's end users are going to have a tough time sending print jobs to a printer that's turned off!
Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage , home of free CCNA and CCNP tutorials! Pass the CCNA exam with Chris Bryant!
Chris Bryant
Similar articles
Cisco CCNA / CCNP Tutorial: Home Lab Assembly Case Study
Part of your CCNA / CCNP education is deciding what network topology to use when you're putting together your home lab. Some of you are starting with one or two routers or switches, while others are starting with more. Read more →Cisco CCNA Certification Exam Tutorial: DNS And The IP Name-Server Command
DNS behaviors of a Cisco router are important topics for both the CCNA exam and real-world production networks, and you probably didn't know there were so many DNS details before you began studying for the exam! Read more →Cisco CCNA Certification: How And Why Switches Trunk
Your CCNA studies are going to include quite a bit of information about switches, and for good reason. if you don't understand basic switching theory, you can't configure and troubleshoot Cisco switches, either on the CCNA exam or in the real world. Read more →Cisco CCNA Exam Tutorial And Case Study: VLANs and IP Connectivity
In this CCNA case study, we'll take some basic switching and trunking theory and put it into action. We have two routers (R2 and R3) along with two switches (SW1 and SW2). Read more →Aphorism
In health of mind and body, men should see with their own eyes, hear and speak without trumpets, walk on their feet, not on wheels, and work and war with their arms, not with engine-beams, nor rifles warranted to kill twenty men at a shot before you can s